Silicon Si ≥ 100g/L
Product Introduction
Rich in natural silicon element, it increases crop nutrient absorption and transport capacity, improves early resistance, salt alkali resistance, and disease resistance. Silicon can significantly improve crop yield and quality.
Technical indicators
Silicon (Si) ≥ 100g/L, sodium (Na) ≤ 45g/L, water-insoluble matter ≤ 10g/L
Limit element indicators: Mercury Hg ≤ 5g/L, Arsenic As ≤ 10g/L, Lead Pb ≤ 50g/L, Chromium Cr ≤ 50g/L, Cadmium Cd ≤ 10g/L
Usage method
1. Spray usage: There is no limit to the dilution ratio, and it should be used at around 150g-200g/acre per spray.
2. Dosage for application: Dilute by more than 400 times for application, with a dosage of 500-1000 grams per acre per application.
3. Seed soaking: Use a 200-400 fold dilution solution and soak for 2-4 hours.
Seed mixing: Use a 30-50 fold dilution solution, mix evenly and moisturize for 2-4 hours.
Note: Coated seeds are prohibited from being soaked or mixed with this product.
Matters needing attention
1. This product is alkaline and should not be mixed with acidic substances for use. The diluent of this product is a yellow or brown transparent liquid. If turbidity appears, the spraying container should be thoroughly cleaned or the dilution water should be replaced. Baking soda can be used when cleaning containers.
2. In case of catastrophic pests and diseases, when spraying pesticides, an additional spray of this product should be applied 5-7 days after the completion of pest control to degrade pesticide residues.
3. This product needs to be prepared and used immediately. If diluted, please use it up on the same day. Excessive application of this product will not have any side effects on crops but will result in waste.
4. The specific dosage should be used according to the guidance of the local dealer.
Product specifications
Dosage form: Water solution Net weight: 1000g/bottle 12 bottles/bottle
Product Introduction
Rich in natural silicon element, it increases crop nutrient absorption and transport capacity, improves early resistance, salt alkali resistance, and disease resistance. Silicon can significantly improve crop yield and quality.
Technical indicators
Silicon (Si) ≥ 100g/L, sodium (Na) ≤ 45g/L, water-insoluble matter ≤ 10g/L
Limit element indicators: Mercury Hg ≤ 5g/L, Arsenic As ≤ 10g/L, Lead Pb ≤ 50g/L, Chromium Cr ≤ 50g/L, Cadmium Cd ≤ 10g/L
Usage method
1. Spray usage: There is no limit to the dilution ratio, and it should be used at around 150g-200g/acre per spray.
2. Dosage for application: Dilute by more than 400 times for application, with a dosage of 500-1000 grams per acre per application.
3. Seed soaking: Use a 200-400 fold dilution solution and soak for 2-4 hours.
Seed mixing: Use a 30-50 fold dilution solution, mix evenly and moisturize for 2-4 hours.
Note: Coated seeds are prohibited from being soaked or mixed with this product.
Matters needing attention
1. This product is alkaline and should not be mixed with acidic substances for use. The diluent of this product is a yellow or brown transparent liquid. If turbidity appears, the spraying container should be thoroughly cleaned or the dilution water should be replaced. Baking soda can be used when cleaning containers.
2. In case of catastrophic pests and diseases, when spraying pesticides, an additional spray of this product should be applied 5-7 days after the completion of pest control to degrade pesticide residues.
3. This product needs to be prepared and used immediately. If diluted, please use it up on the same day. Excessive application of this product will not have any side effects on crops but will result in waste.
4. The specific dosage should be used according to the guidance of the local dealer.
Product specifications
Dosage form: Water solution Net weight: 1000g/bottle 12 bottles/bottle
